2022-03-30发表2022-09-30更新学习笔记 / 嵌入式开发29 分钟读完 (大约4381个字)0次访问

Hi3516DV300踩坑笔记

资料

命令

#环境
gedit ~/.bashrc
export PATH=/opt/hisi-linux/x86-arm/arm-himix200-linux/bin:$PATH
source ~/.bashrc

#安装cmake clion最高支持到3.21.x
sh cmake-3.21.0-linux-x86_64.sh
sudo mv cmake-3.21.0-linux-x86_64 /opt/cmake-3.21.0
sudo ln -sf /opt/cmake-3.21.0/bin/*  /usr/bin/

#uboot配置 netstat -aon|findstr "6"
setenv bootargs 'mem=512M console=ttyAMA0,115200 coherent_pool=2M root=/dev/mtdblock2 rootfstype=yaffs2 rw mtdparts=hinand:1M(boot),4M(kernel),200M(rootfs)'
setenv bootcmd 'nand read 0x82000000 0x100000 0x400000;bootm 0x82000000'
sa
reset

#配置网卡
#mount -t nfs -o nolock 192.168.1.151:/home/swann/Desktop/hisi/sample /mnt
#umount /mnt
ifconfig eth0 192.168.1.10 netmask 255.255.255.0
route add default gw 192.168.1.1
mount -t nfs -o nolock 192.168.1.151:/home/swann/nfs /mnt
cd /mnt/mpp/sample

#pqtools
 ./HiIspTool.sh -a imx335 0 
 
 #ssh
 
cd /usr/local/openssh/etc
../bin/ssh-keygen -t rsa1 -f ssh_host_key -N ""     ###这个不需要
../bin/ssh-keygen -t rsa -f ssh_host_rsa_key -N ""
../bin/ssh-keygen -t dsa -f ssh_host_dsa_key -N ""
../bin/ssh-keygen -t ecdsa -f ssh_host_ecdsa_key -N ""

/sbin/sshd &

#gdb
./gdbserver :1234 ./sample_venc_osd_rtsp 

#uart
himm 0x114f0000 0x0502
himm 0x114f0004 0x0402
#发送数据：
echo "test 1234567890" > /dev/ttyAMA3
#接收数据： 
cat /dev/ttyAMA3
#test
./uart_test -d /dev/ttyAMA3 -s 115200 -w HiSerial:Helloworld
./uart_test -d /dev/ttyAMA3 -s 115200 -r

#copy时排除某些文件或文件夹
cp -r `ls |grep -v /mnt|xargs` /mnt/backup2
#比较目录
diff -urNa dir1 dir2
　　-a Treat all files as text and compare them line-by-line, even if they do not seem to be text.
　　-N, --new-file
　　　　In directory comparison, if a file is found in only one directory, treat it as present but empty in the other directory.
　　-r When comparing directories, recursively compare any subdirectories found.
　　-u Use the unified output format.

疑问

swann下有的命令root下没有arm-xxx。
编译uboot时，一直出现xxx文件不存在的错误，竟然是因为文件路径名长度的原因？？？！！！
HI3516DV300 HITOOL 等待boot启动超时，单板上无fastboot或当前fastboot无法启动

原来是厂商给的uboot有问题呀😅
Hitools烧写时，uImage能通过网口烧写，rootfs不行。原因是hitool软件bug，烧完uImage依旧占用69TFTP端口。
TFTP服务器启动失败,端口69可能被占用!

由于Clion使用了远程开发功能，把Clion关闭解决问题。。
出厂镜像是imx325.。。。imx335需要自己编译
rtsp-live555

海思hi3516dv300开发–live555交叉编译

hi3518e移植live555实现点播_网络_chengqingyao的博客-CSDN博客

编译freetype和stl时出现

../../src/freetype_stl_ttl/lib/libSDL_ttf.a(SDL_ttf.o): In function `Load_Glyph':
/home/swann/Desktop/freetype-SDL-SDL_TTL-master/SDL_ttf-2.0.11/SDL_ttf.c:593: undefined reference to `FT_Load_Glyph'
/home/swann/Desktop/freetype-SDL-SDL_TTL-master/SDL_ttf-2.0.11/SDL_ttf.c:655: undefined reference to `FT_Outline_Transform'
/home/swann/Desktop/freetype-SDL-SDL_TTL-master/SDL_ttf-2.0.11/SDL_ttf.c:661: undefined reference to `FT_Get_Glyph'
/home/swann/Desktop/freetype-SDL-SDL_TTL-master/SDL_ttf-2.0.11/SDL_ttf.c:662: undefined reference to `FT_Stroker_New'
/home/swann/Desktop/freetype-SDL-SDL_TTL-master/SDL_ttf-2.0.11/SDL_ttf.c:678: undefined reference to `FT_Render_Glyph'
/home/swann/Desktop/freetype-SDL-SDL_TTL-master/SDL_ttf-2.0.11/SDL_ttf.c:879: undefined reference to `FT_Done_Glyph'
/home/swann/Desktop/freetype-SDL-SDL_TTL-master/SDL_ttf-2.0.11/SDL_ttf.c:591: undefined reference to `FT_Get_Char_Index'

改变CMake顺序

${CMAKE_SOURCE_DIR}/src/freetype_stl_ttl/lib/libSDL_ttf.a
${CMAKE_SOURCE_DIR}/src/freetype_stl_ttl/lib/libfreetype.a
${CMAKE_SOURCE_DIR}/src/freetype_stl_ttl/lib/libSDL.a
${CMAKE_SOURCE_DIR}/src/freetype_stl_ttl/lib/libSDLmain.
${CMAKE_SOURCE_DIR}/src/freetype_stl_ttl/lib/libSDL_ttf.a

编译和安装 openssl 时出错，POD document had syntax errors

installing man1/smime.1
　　smime.pod around line 272： Expected text after =item， not a number
　　smime.pod around line 276： Expected text after =item， not a number
　　smime.pod around line 280： Expected text after =item， not a number
　　smime.pod around line 285： Expected text after =item， not a number
　　smime.pod around line 289： Expected text after =item， not a number
　　POD document had syntax errors at /usr/bin/pod2man line 71.
　　make： *** ［install_docs］错误 255
　　原因分析：这是由于 OpenSSL 1.0.1e 与 perl5.18 不兼容。
　　解决方法：
　　1、有人验证安装 perl 5.16 可以兼容，安排低版本 perl 5.16 可以解决问题。
　　2、删除 pod2man 文件：
　　sudo rm /usr/bin/pod2man
求助 hi3516DV300 UART3 串口无法通信调试，内核打印cut here

TMD 解决方式hi3516 内核开启UART支持

------------[ cut here ]------------
WARNING: CPU: 0 PID: 164 at drivers/tty/serial/serial_core.c:440 uart_get_baud_rate+0xec/0x14c
Modules linked in: hi_mipi_rx(O) hi3516cv500_acodec(PO) hi3516cv500_adec(PO) hi3516cv500_aenc(PO) hi3516cv500_ao(PO) hi3516cv500_ai(PO) hi3516cv500_aio(PO) hi3516cv500_hdmi(PO) hi_sensor_spi(O) hi_sensor)
CPU: 0 PID: 164 Comm: sh Tainted: P W O 4.9.37 #

解决方法：另外hi3516dv300的uart3有个bug，缺少对UART3时钟的配置 kernel/linux-4.9.y/
vi drivers/clk/hisilicon/clk-hi3516dv300.c文件中

static struct hisi_gate_clock hi3516dv300_gate_clks[] 在132行添加一项：

1	`{ HI3516DV300_UART3_CLK, "clk_uart3", "uart_mux3",CLK_SET_RATE_PARENT, 0x1b8, 3, 0, },`

如下所示

static struct hisi_gate_clock hi3516dv300_gate_clks[] __initdata = {
			/* fmc */
			{ HI3516DV300_FMC_CLK, "clk_fmc", "fmc_mux",
				CLK_SET_RATE_PARENT, 0x144, 1, 0, },
			/* mmc */
			{ HI3516DV300_MMC0_CLK, "clk_mmc0", "mmc0_mux",
				CLK_SET_RATE_PARENT, 0x148, 1, 0, },
			{ HI3516DV300_MMC1_CLK, "clk_mmc1", "mmc1_mux",
				CLK_SET_RATE_PARENT, 0x160, 1, 0, },
			{ HI3516DV300_MMC2_CLK, "clk_mmc2", "mmc2_mux",
				CLK_SET_RATE_PARENT, 0x154, 1, 0, },
			/* uart */
			{ HI3516DV300_UART0_CLK, "clk_uart0", "uart_mux0",
				CLK_SET_RATE_PARENT, 0x1b8, 0, 0, },
			{ HI3516DV300_UART1_CLK, "clk_uart1", "uart_mux1",
				CLK_SET_RATE_PARENT, 0x1b8, 1, 0, },
			{ HI3516DV300_UART2_CLK, "clk_uart2", "uart_mux2",
				CLK_SET_RATE_PARENT, 0x1b8, 2, 0, },
			// 132行增加uart3的配置
			{ HI3516DV300_UART3_CLK, "clk_uart3", "uart_mux3",
				CLK_SET_RATE_PARENT, 0x1b8, 3, 0, },
			{ HI3516DV300_UART4_CLK, "clk_uart4", "uart_mux4",
				CLK_SET_RATE_PARENT, 0x1b8, 4, 0, },
			/* i2c*/
			{ HI3516DV300_I2C0_CLK, "clk_i2c0", "50m",
					CLK_SET_RATE_PARENT, 0x1b8, 11, 0, },
			{ HI3516DV300_I2C1_CLK, "clk_i2c1", "50m",
					CLK_SET_RATE_PARENT, 0x1b8, 12, 0, },

笔记

1.OSD库

HH_OSD_Init //进行一些初始化并实现内容的显示
HH_OSD_SetOsdPosDefault //设置osd的坐标的，使用默认的位置
HH_OSD_GetOrg //获取进行显示位置的的坐标
HH_OSD_GetColor //获取颜色
HH_OSD_GetTitle //获取要显示的内容
HI_Create_Osd //创建一个显示logo，实例化一个用于显示的logo变量
HI_OSD_Build //创建osd结构体，创建位图，直接显示
HI_OSD_Parse_OsdTitle //解析osd字符，更新字符相关属性
HI_OSD_Get_BmpSize //根据ip_config配置的视频源的大小，来配置pOsdLogo中记录的OSD的字母的宽高、x,y坐标等
HI_Create_Osd_Reg //首先申请了OSD的bmp图片的内存buf，然后调用海思的RGN API来初始化overlay
HI_MPI_RGN_Create //创建osd
HI_MPI_RGN_AttachToChn //将osd与venc的通道绑定
HI_OSD_Create_Bitmap根据pOsdLogo记录的OSD要显示的内容，来生成bmp图片数据，然后调用HI_MPI_RGN_SetBitMap将这张BMP图片显示到OSD中
HI_OSD_CreateBMP // 用字库来生成bmp文件的
HI_MPI_RGN_SetBitMap // 真正设置osd显示的API
HI_OSD_Set_Show //根据传参show为true或者false来开启或关闭OSD的显示
HI_MPI_RGN_GetDisplayAttr //获取区域的通道显示属性
HI_MPI_RGN_SetDisplayAttr //设置区域的通道显示属性
HH_OSD_All_Refresh //手动去刷新显示的内容,实现时间的变化
HH_OSD_AllTime_Refresh
HH_OSD_ChnTime_Refresh
HH_OSD_ChName_Refresh
HH_OSD_GetLogoHandle
HH_OSD_GetTitle //获取显示的内容
HI_OSD_Parse_OsdTitle 解析osd的字符,更新字符相关属性
HI_OSD_Get_BmpSize
HI_OSD_Create_Bitmap
HI_OSD_CreateBMP
HI_MPI_RGN_SetBitMap
HH_OSD_Show_Refresh
HH_OSD_GetLogoHandle
HH_OSD_GetShow
HI_OSD_Set_Show //根据传参show为true或者false来开启或关闭OSD的显示
HH_OSD_AllName_Refresh

开机同步时间

调用ntpdate 函数

#include <stdio.h>
#include <stdlib.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <netinet/in.h>
#include <arpa/inet.h>
#include <netdb.h>
#include <time.h>
#include <string.h>
int get_yue(char *secons);
void ntpdate();
#include <iostream>
using namespace std;

string getFormatTime(int year, int mon, int day, int hour, int min, int sec, int type);
void get_alarm_time();

int main()
{
    ntpdate();
    return 0;
}

void ntpdate()
{
    //char *hostname=(char *)"163.117.202.33";
    //char *hostname=(char *)"pool.ntp.br";
    char *hostname = (char *)"200.20.186.76";
    int portno = 123;                                      //NTP is port 123
    int maxlen = 1024;                                     //check our buffers
    int i;                                                 // misc var i
    unsigned char msg[48] = {010, 0, 0, 0, 0, 0, 0, 0, 0}; // the packet we send
    unsigned long buf[maxlen];                             // the buffer we get back
    //struct in_addr ipaddr;        //
    struct protoent *proto; //
    struct sockaddr_in server_addr;
    int s;     // socket
    long tmit; // the time -- This is a time_t sort of

    //use Socket;
    //
    //#we use the system call to open a UDP socket
    //socket(SOCKET, PF_INET, SOCK_DGRAM, getprotobyname("udp")) or die "socket: $!";
    proto = getprotobyname("udp");
    s = socket(PF_INET, SOCK_DGRAM, proto->p_proto);
    perror("socket");
    //
    //#convert hostname to ipaddress if needed
    //$ipaddr   = inet_aton($HOSTNAME);
    memset(&server_addr, 0, sizeof(server_addr));
    server_addr.sin_family = AF_INET;
    server_addr.sin_addr.s_addr = inet_addr(hostname);
    //argv[1] );
    //i   = inet_aton(hostname,&server_addr.sin_addr);
    server_addr.sin_port = htons(portno);
    //printf("ipaddr (in hex): %x\n",server_addr.sin_addr);

    /*
 * build a message.  Our message is all zeros except for a one in the
 * protocol version field
 * msg[] in binary is 00 001 000 00000000 
 * it should be a total of 48 bytes long
*/

    // send the data
    //printf("sending data..\n");
    i = sendto(s, msg, sizeof(msg), 0, (struct sockaddr *)&server_addr, sizeof(server_addr));
    perror("sendto");
    // get the data back
    struct sockaddr saddr;
    socklen_t saddr_l = sizeof(saddr);
    i = recvfrom(s, buf, 48, 0, &saddr, &saddr_l);
    perror("recvfr:");

    //We get 12 long words back in Network order
    /*
for(i=0;i<12;i++) {
    //printf("%d\t%-8x\n",i,ntohl(buf[i]));
    long tmit2=ntohl((time_t)buf[i]);
    std::cout << "Round number " << i << " time is " << ctime(&tmit2)  << std::endl;
}
*/
    /*
 * The high word of transmit time is the 10th word we get back
 * tmit is the time in seconds not accounting for network delays which
 * should be way less than a second if this is a local NTP server
 */

    //tmit=ntohl((time_t)buf[10]);    //# get transmit time
    tmit = ntohl((time_t)buf[4]); //# get transmit time是将一个无符号长整形数从网络字节顺序转换为主机字节顺序
    //printf("tmit=%d\n",tmit);

    /*
 * Convert time to unix standard time NTP is number of seconds since 0000
 * UT on 1 January 1900 unix time is seconds since 0000 UT on 1 January
 * 1970 There has been a trend to add a 2 leap seconds every 3 years.
 * Leap seconds are only an issue the last second of the month in June and
 * December if you don't try to set the clock then it can be ignored but
 * this is importaint to people who coordinate times with GPS clock sources.
 */

    tmit -= 2208988800U;
    //printf("tmit=%d\n",tmit);
    /* use unix library function to show me the local time (it takes care
 * of timezone issues for both north and south of the equator and places
 * that do Summer time/ Daylight savings time.
 */

    //#compare to system time
    //printf("Time: %s",ctime(&tmit));

    // 一月JAN
    // 二月FEB
    // 三月MAR
    // 四月APR
    // 五月MAY
    // 六月JUN
    // 七月JUL
    // 八月AUG
    // 九月SEP
    // 十月OCT
    // 十一月NOV
    // 十二月DEC
    //Thu Mar 19 05:43:42 2020
    //std::cout << "time is " << ctime(&tmit) << std::endl;
    char *gTime = ctime(&tmit);
    char time_str[32] = {0};
    char year[5] = {0};
    char secons[3] = {0};
    char day[3] = {0};
    char s1[3] = {0};
    char f[3] = {0};
    char m[3] = {0};
    int tmp = 0;
    //年
    year[0] = gTime[20];
    year[1] = gTime[21];
    year[2] = gTime[22];
    year[3] = gTime[23];
    //月
    secons[0] = gTime[4];
    secons[1] = gTime[5];
    secons[2] = gTime[6];
    get_yue(secons);
    printf("get_yue:%s\n", secons);
    //日
    day[0] = gTime[8];
    day[1] = gTime[9];
    //时
    s1[0] = gTime[11];
    s1[1] = gTime[12];
    tmp = atoi(s1);
    tmp += 8; //调整时区到东八区。
    if (tmp >= 24)
        tmp %= 24;
    sprintf(s1, "%d", tmp);
    //分
    f[0] = gTime[14];
    f[1] = gTime[15];
    //秒
    m[0] = gTime[17];
    m[1] = gTime[18];


    //date -s "2020-03-24 17:03:50"

    sprintf(time_str, "date -s  \"%s-%s-%s %s:%s:%s\"", year, secons, day, s1, f, m);

    printf("%s     -----%s\n", time_str, gTime);
    system(time_str);
}

int get_yue(char *secons)
{
    printf("secons %s\n", secons);
    int seconss = -1;
    if (strncmp(secons, "Jan", 3) == 0)
    {
        secons[0] = '0';
        secons[1] = '1';
    }
    else if (strncmp(secons, "Feb", 3) == 0)
    {
        secons[0] = '0';
        secons[1] = '2';
    }
    else if (strncmp(secons, "Mar", 3) == 0)
    {
        secons[0] = '0';
        secons[1] = '3';
    }
    else if (strncmp(secons, "Apr", 3) == 0)
    {
        secons[0] = '0';
        secons[1] = '4';
    }
    else if (strncmp(secons, "May", 3) == 0)
    {
        secons[0] = '0';
        secons[1] = '5';
    }
    else if (strncmp(secons, "Jun", 3) == 0)
    {
        secons[0] = '0';
        secons[1] = '6';
    }
    else if (strncmp(secons, "Jul", 3) == 0)
    {
        secons[0] = '0';
        secons[1] = '7';
    }
    else if (strncmp(secons, "Aug", 3) == 0)
    {
        secons[0] = '0';
        secons[1] = '8';
    }
    else if (strncmp(secons, "Sep", 3) == 0)
    {
        secons[0] = '0';
        secons[1] = '9';
    }
    else if (strncmp(secons, "Oct", 3) == 0)
    {
        secons[0] = '1';
        secons[1] = '0';
    }
    else if (strncmp(secons, "Nov", 3) == 0)
    {
        secons[0] = '1';
        secons[1] = '1';
    }
    else if (strncmp(secons, "Dec", 3) == 0)
    {
        secons[0] = '1';
        secons[1] = '2';
    }
    else
    {
        printf("Error!\n");
    }
    seconss = 1;
    secons[2] = 0;
    return seconss;
}

void get_alarm_time()
{
    time_t time_seconds = time(0);
    struct tm now_time;
    localtime_r(&time_seconds, &now_time);

    string alarmTimeAsName = getFormatTime(now_time.tm_year + 1900, now_time.tm_mon + 1, now_time.tm_mday, now_time.tm_hour, now_time.tm_min, now_time.tm_sec, 0);
    string alarmTimeAsDate = getFormatTime(now_time.tm_year + 1900, now_time.tm_mon + 1, now_time.tm_mday, now_time.tm_hour, now_time.tm_min, now_time.tm_sec, 1);
}

std::string getFormatTime(int year, int mon, int day, int hour, int min, int sec, int type)
{
    std::string yearStr = std::to_string(year);
    std::string monStr, dayStr, hourStr, minStr, secStr;
    if (mon >= 10)
        monStr = std::to_string(mon);
    else
        monStr = "0" + std::to_string(mon);
    if (day >= 10)
        dayStr = std::to_string(day);
    else
        dayStr = "0" + std::to_string(day);
    if (hour >= 10)
        hourStr = std::to_string(hour);
    else
        hourStr = "0" + std::to_string(hour);
    if (min >= 10)
        minStr = std::to_string(min);
    else
        minStr = "0" + std::to_string(min);
    if (sec >= 10)
        secStr = std::to_string(sec);
    else
        secStr = "0" + std::to_string(sec);

    if (!type)
        return (yearStr + monStr + dayStr + hourStr + minStr + secStr);
    if (type == 1)
        return (yearStr + "-" + monStr + "-" + dayStr + "%20" + hourStr + ":" + minStr + ":" + secStr);
}

变量命名

1、定义枚举类型，注意字母后面的E。

typedef enum hiHI_MPP_WDR_MODE_E

{
HI_MPP_WDR_MODE_NONE = 0,
HI_MPP_WDR_MODE_BUILT_IN,
HI_MPP_WDR_MODE_2To1_LINE,
HI_MPP_WDR_MODE_2To1_FRAME,
HI_MPP_WDR_MODE_2To1_FRAME_FULL_RATE,
HI_MPP_WDR_MODE_3To1_LINE,
HI_MPP_WDR_MODE_3To1_FRAME,
HI_MPP_WDR_MODE_3To1_FRAME_FULL_RATE,
HI_MPP_WDR_MODE_4To1_LINE,
HI_MPP_WDR_MODE_4To1_FRAME,
HI_MPP_WDR_MODE_4To1_FRAME_FULL_RATE,
HI_MPP_WDR_MODE_BUTT

}HI_MPP_WDR_MODE_E;

定义枚举类型的变量，注意变量前面的en，应试enum的缩写。

HI_MPP_WDR_MODE_E enWdrMode;

2、定义结构体类型。

typedef struct hiHI_MPP_SENSOR_ATTR_S
{undefined
HI_S32 s32FrameRate;
HI_MPP_RESOLUTION_S stResolution;
HI_MPP_WDR_MODE_E enWdrMode;
} HI_MPP_SENSOR_ATTR_S;

注意定义结构体变量时在变量的前面加上“st” ，应是struct的缩写吧。

HI_MPP_SENSOR_ATTR_S stSensorAttr;

3、定义基本类型的别名。

typedef unsigned char HI_U8;
typedef unsigned short HI_U16;
typedef unsigned int HI_U32;

typedef signed char HI_S8;
typedef short HI_S16;
typedef int HI_S32;

HI_S32 s32Ret；//define a int variable,notify “s32”
自启–etc/inittab

换源

      deb http://mirrors.aliyun.com/ubuntu/ xenial main restricted universe multiverse
      deb-src http://mirrors.aliyun.com/ubuntu/ xenial main restricted universe multiverse
      
      deb http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted universe multiverse
      deb-src http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted universe multiverse
      
      deb http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted universe multiverse
      deb-src http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted universe multiverse
      
      deb http://mirrors.aliyun.com/ubuntu/ xenial-proposed main restricted universe multiverse
      deb-src http://mirrors.aliyun.com/ubuntu/ xenial-proposed main restricted universe multiverse
      
      deb http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse
      deb-src http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse

# 使用脚本

```bash
# 开机大于10s检测  Welcome to HiLinux.

ifconfig eth0 192.168.1.10 netmask 255.255.255.0
#2s内返回 link becomes ready

route add default gw 192.168.1.1
#无返回

/sample_venc_osd_rtsp

Hi3516DV300踩坑笔记

https://www.shjdgwj.cn/950217ef599c/

作者

GWJ

发布于

2022-03-30

更新于

2022-09-30

许可协议

#海思

Hi3516DV300踩坑笔记

资料

命令

疑问

笔记

作者

发布于

更新于

许可协议

评论

分类

标签

目录

归档